Filter
Top Products
- 26 - EN- 26 - EN- 26 - EN- 26 - EN
INDEX SEARCH
This feature provides a method of indexing the start-
ing point so that it can be easily returned to in either
fast forward or rewind mode.
•
The index mark will be made automatically when
[RECORD] is pressed. It will also be marked at
the starting point of Timer recording and OTR.
•
The index mark will not be recorded if [PAUSE
F] is pressed and released during recording.
•
The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording and 3 min-
utes for SLP recording.
•
In some cases, the index mark at the beginning of
video tape cannot be detected.
Example: You are watching program number 4 and
want to fast forward to program number 7. You
must skip three programs.
TV/VCR
1 Select “INDEX SEARCH”
Press [SETUP].
Press
[K / L] to point to “INDEX
SEARCH”, then press
[ENTER].
2 Enter your desired number
Press [K / L] until the number of
programs that you want to skip
appears.
(Example: “03” for 3 programs)
•
The Index Search mode will be canceled if the pro-
cedures are not activated in 30 seconds.
3 Begin Index Search
Press [s
/
B]. The unit begins rewinding or fast for-
warding to the beginning of desired program.
NOTE:
•
Every time an index signal is skipped, the number
in the program indicator decreases by one.
4 After Index Search
When the preset program is reached, the unit will
start playback automatically.
•
A video cassette must be inserted in the unit for
this function to work.
•
The number of Index Searches can be set up to 20.
•
This function will not operate in the Recording
mode.
•
When you want to cancel the Index Search while
in progress, press [STOP C].
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7
4321123
End of
the tape
Beginning of
the tape
CURRENT PLAYBACK PROGRAM
INDEX MARK
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
B INDEX SEARCH
INDEX SEARCH
0 3