Filter
Top Products
- 23 - EN- 23 - EN
PLAYBACK
NORMAL PLAYBACK
Make sure ...
•
The unit must be turned on.
1 Insert a prerecorded tape
If the erase-prevention tab has been removed, the
unit will start playback automatically.
2 To begin playback
Press [PLAY O].
3 To stop playback
Press [STOP C].
NOTES:
•
Even in the DVD mode, you can start the VCR
playback if you press [
B
PLAY] (of the TV/VCR
side).
•
VCR playback will stop and the mode will change
to the DVD mode by pressing [SELECT],
[
B
PLAY] (DVD side) or [
A
OPEN/CLOSE].
TV/VCR
TRACKING ADJUSTMENT
•
Tracking adjustment will be set automatically
(Digital Tracking function) when you start play-
back.
•
Noise lines (black and white streaks) may appear
on the playback picture when playing pre-recorded
tapes or tapes recorded on other VCR. If this
occurs, press
[CH.
K
/
L
] until the streaks disap-
pear.
•
You can reduce the noise lines by pressing
[CH.
K
/
L
] in Slow mode too. Tracking adjust-
ment in Slow mode will not be set automatically.
•
To return to the Digital Auto Tracking function,
stop the tape once and start playback.
TV/VCR
PLAY
B
STOP
STILL PICTURE
You can view a still picture on the TV screen during
playback (the Still mode). Press [PAUSE F] during
playback. Only tapes recorded in the SLP mode will
show the least amount of lines. Press [PLAY O] to
return to playback.
NOTES:
•
You can advance the picture one frame at a time by
pressing [PAUSE F] during the Still mode.
•
If it is left in the Pause mode for more than 5 min-
utes, the unit will automatically switch to the stop
mode.
TV/VCR
SLOW MOTION
Press [PAUSE F], then press [D] to start the play-
back in slow motion. The unit mutes the sound dur-
ing slow motion. Press [PLAY O] to return to nor-
mal playback.
NOTE:
•
If it is left in the Slow mode for more than 5 min-
utes, the unit will automatically go into the stop
mode.
TV/VCR
VERTICAL HOLD CONTROL
In the Pause/Still mode only, when the picture begins
to vibrate vertically, stabilize the picture by pressing
[CH.
K
/
L
].
NOTE:
•
If there are video noise lines on the screen, refer to
TRACKING ADJUSTMENT on this page.
TV/VCR