Filter
Top Products
37EN
Disc
Management
Recording
PlaybackIntroduction Connections Basic Setup Editing Function Setup
Others Español
SATELLITE LINK
You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• Satellite link accepts only the connection from L1 (rear)
with the external tuner. (The connection from L2 cannot
read any signals from the external tuner.)
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
1
Press [SETUP].
2
Use [K / L] to select “Timer
Programming”, then press [ENTER].
3
Use [K / L] to select “Satellite Link”,
then press [ENTER].
Timer Programming
Satellite Link
Timer Programming
4
Use [K / L] to select the time and
recording speed, then press [ENTER].
Satellite Link
Start Speed
5:00PM 2H
To Standby Mode
5
Use [K / L] to set the desired starting
time, then press [
B].
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in step 5 to set the desired
minutes.
• If you wish to go back to the left, press [{].
6
Use [K / L] to select the recording
speed.
Refer to page 30 for details.
NB090
DVD RECORDER
POWER
ZOOM
OPEN/CLOSE
DISPLAY
PLAYREV FWD
STOP
REC/OTR
SKIP SKIP
PAUSE
MENU/LIST
TOP MENU
AUDIO
SETUP
X1.3/0.8
ENTER
CM SKIP
REC SPEED
TIMER
PROG.
RETURN
CLEARSPACE
DEFABC.@/:
MNOJKLGHI
WXYZ REPEATTUVPQRS
INPUT SELECT
POWER
SETUP
ENTER
TIMER
PROG.
Instructions continue on the next page.