Filter
Top Products
26
Parental Setting
Parental setting prevents your children from viewing inappropriate
materials. (password protected.) Playback will stop if the ratings
exceed the levels you set.
1 Use the Number buttons to enter the 4-digit password for
your password, then press ENTER.
PARENTAL
ENTER/OK
Please enter a 4-digit password.
PASSWORD
• If you have set password already, use
the Number buttons to enter the current 4-digit
password.
• You cannot use the default password (4737) to play
back a DVD.
2 Use ▲/▼ to select the [PARENTAL LEVEL], then press
ENTER.
3 Use ▲/▼ to select the desired item, then press ENTER.
PARENTAL LEVEL
ALL
All parental locks are cancelled.
8 [ADULT]
All ratings (adult / general / children) can be
played back.
7 [NC-17]-2 [G]
Only DVD intended for general use and
children can be played back.
1 [KID SAFE]
Only DVD intended for children can be played
back.
To change the password
4 At step 2, use ▲/▼ to select [PASSWORD CHANGE]
then press ENTER.
5 Use the Number buttons to enter the new 4-digit
password.
Note
• DVD-video may not respond to parental lock settings. Make sure
this function works with your DVD-video.
• Record the password in case you forget it.
• If you forget the password, press 4, 7, 3, 7, then enter your new
password. Password will be cleared and parental levels will be set
to [ALL].
• A power failure will not erase your password.
Others
You can change the other functions.
1 Use ▲/▼ to select the desired item, then press ENTER.
OTHERS
ENTER/OK
ANGLE ICON ON
STILL MODE AUTO
AUTO POWER OFF ON
2 Adjust the following items.
ANGLE ICON
(Default: ON)
Set to [ON] to show the angle icon when multiple camera
angles are available during DVD playback.
STILL MODE
(Default: AUTO)
Set the picture quality in the still mode.
If you select [AUTO], it automatically selects the best
resolution setting ([FRAME] or [FIELD]) based on the date
characteristics of the pictures.
FIELD
The picture in the still mode will be stabilized.
FRAME
The picture in the still mode will be highly defined.
AUTO POWER OFF
(Default: ON)
Set to [ON] if there is no operation for 20 minutes, the unit
goes into standby mode.
Reset to the Default Setting
You can reset all the settings except for the parental setting and
on-screen menu language.
1 Use ▲/▼ to select [YES], then press ENTER.
INITIALIZE
ENTER/OK
Initialize?
NO
YES
Note
• When you want to cancel the initialization, select [NO], then press
ENTER.