Filter
Top Products
51EN
Disc
Management
Recording
Playback
Introduction
Connections Basic Setup Editing
Function
Setup
VCR Functions Others Español
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
1
Turn on the TV and press
[POWER], and be sure to select the
input of the TV to which the unit is
connected.
2
When you want to record to the disc:
Press [DVD
].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
It takes a while to load
the disc.
When you want to record to a
cassette tape:
Press [VCR
].
Insert the cassette tape with an
erase-protection tab into the cassette
compartment.
3
Select the input of the unit which the
external device is connected. (L1 or
L2)
• To use the input jacks on the rear of this unit;
Select “L1” by using [INPUT SELECT] or
[CH K / L].
• To use the input jacks on the front of this unit;
Select “L2” by using
[INPUT SELECT] or [CH K / L].
• You can also select “L1” or “L2” by using
[the Number buttons].
- For L1, press [0], [0], [1].
- For L2, press [0], [0], [2].
4
Press [REC SPEED] to select a
recording speed.
Refer to “Recording Speed” on page 43 for DVD
or “Recording” on page 93 for VCR.
5
Press [RECORD] on the unit to start
recording.
6
Start playback on the external device
to record from.
7
Press [STOP C] / [STOP C/EJECT A]
on the unit to stop recording.
This operation may take
awhile to be completed.
Before recording from an external device, refer to the
instructions for the connection on page 50.
123
456
789
0
POWER
OPEN/CLOSE
DISPLAY
VCR DVD
CH
PLAY
STOP
REC/OTR
SKIP SKIP
PAUSE
MENU/LIST
TOP MENU
AUDIO
SETUP
X1.3/0.8
T-SET SEARCH
ENTER
DUBBING
CM SKIP
REC SPEED
TIMER PROG.
RETURN
CLEARSPACE
DEF
DTV / TV
ABC
.@/:
MNOJKL
GHI
WXYZTUV
PQRS
INPUT
SELECT
DVD RECORDER / VCR
NB666
POWER
OPEN/CLOSE
123
456
789
0
SPACE
DEFABC
.@/:
MNOJKL
GHI
WXYZTUV
PQRS
CH
REC SPEED
DVD
INPUT
SELECT
VCR
2
17
7
5
5
E9H10UD.indd 51E9H10UD.indd 51 2007/02/19 14:55:372007/02/19 14:55:37