Filter
Top Products
10
AUDIO OUTPUT AND DISPLAY ON SCREEN
Transmission Mode
Display on Screen
Audio Output
Mono
STEREO : MONO
Ineffective
Stereo
Dual. Sound
STEREO
MONO
DUAL I
DUAL II
Stereo
Mono (Forced)
Sound I
Sound II
CONNECTING A VCR TO THE TV SET
This TV set has AUDIO/VIDEO input and output sockets on the back panel which allow direct
connection to a VCR using the AV Button (13). The direct Video/Audio connection bypasses
the antenna circuitry and allows for better quality recordings and easier operation, but like all
high-technology it gets complicated.
The sockets are grouped in two sets of three, OUT and IN.
The TV set has true Stereo sound, and there are two Audio sockets in each group-L/Mono
and R/Stereo channels-plus one Video socket. Which of these sockets you connect depends on
what you to do with the VCR and what sort of VCR it is. If the VCR is Mono, connect just
the L/Mono Audio lead. The R/Stereo lead is optional for Stereo only.
SOUND MULTIPLEX SWITCHING
The TV station has the option of transmitting Mono, Stereo, or Dual-channel sound. The
set detects the transmission automatically and allows the S. MPX button to make the correct
choices.
S. MPX Button (11)
The choice of sound is limited by what the TV station is sending. The possible choices are
shown below. Press the button and the choices available will be displayed on the screen in
turn.
STEREO
MONO
DUAL I DUAL II
Dual Sound Transmission Mode
Stereo Sound Transmission Mode
.
.