11. S.MPX (Stereo switching)
BUTTON LIST
The trick is to push the buttons slowly; it takes a moment to register. Be careful that the
button does not lock down. Some buttons behave differently in TV and Teletext. The following
list is grouped according to TV or Teletext. If the description of a button is missing in one list,
it will be found in the other.
TV FUNCTIONS
This turns the set off. The red STANDBY light comes on to show that the set is in
Standby. If the set is left unattended for long periods it should be switched off with the
POWER SWITCH.
2. BRIGHTNESS ( - +)
3. CONTRAST ( - +)
4. COLOUR
5. VOLUME ( - + )
The "-" button decreases the level and the "+" button increases it.
Press these buttons to change the Channel Numbers up and down one at a time.
8. PP
Press this button to select the Personal Preference preset values of Volume, Brightness,
Colour and Contrast.
9. MUTE ( )
Cuts the sound without affecting the picture. To restore sound press it again.
10. SLEEP ( )
This button is for those who fall asleep watching TV. The set switches off after a preset
time. Press the button repeatedly to count up to 120 minutes and back to OFF. The set
will go into STANDBY automatically when the time is up.
This TV set is fitted with full Stereo/Dual-channel Sound. Depending on what the TV
station is transmitting, the S.MPX button selects between Stereo/Mono, and Dual I
and Dual II channels. This also shows on the screen.
For more detailed explanation, see "Listing to Stereo/Dual-channel TV Sound" in a
following section of the Manual.
13. AV ( )
The set is has Audio/Video sockets on the back for connecting VCRs directly. Press this
button to take input from the Audio/Video sockets. If there is no signal the screen will be
blank grey with AV showing in the upper left corner. To return to TV press Button (14)
14. TV( )
This button returns all other modes back to TV.
15. RECALL ( )
1. STANDBY (O)
-
6,7. PR (+ / -)
If the TV set is in STANDBY (red light), press this button to turn the set on.
It also shows the Channel Number, the TV Band, and the Sleep timer settings.
8
.
+
12. DIGITAL SELECT (-/--)
Press this button to change from single-digit to double digit mode.