Filter
Top Products
Chapter 4: Operations
17
LOCK Settings
Password setup
The Rating Control lets you set up specific channels and ratings
through blocking schemes. To activate or disable all of the lock
schemes previously set up, a password is required to gain access to
this menu. You can change the password by inputting a new
password twice.
Press MENU button to access the menu mode.
Press button to select and highlight Password.
Press ENTER button to enter into the Password menu.
Press button to highlight PWD Setup. Press ENTER to
enter into the next level.
When you have not set a password yet;
Enter a password using the numbered buttons to create a
personal 4-digit security password.
When you have already set a password and you want to
change it;
Enter the old password, then input a 4-digit new password using
the numbered buttons and confirm again.
Note:
There is no preset password in this STB, therefore when you use this STB at the first time, you may
create a password by yourself if required.
Clear password
If you want to clear the password, please do the following steps:
Enter into the Password sub-menu.
Press button to select and highlight Clear PWD. Press
ENTER to enter into the next level.
Now a dialogue box appears asking you to input the old
password.
Input the old password correctly. Now a dialogue box "Sure to
clear password?" appears. Select Yes and press ENTER.
Now the password is cleared.
1
2
3
4
1
2
3
4
Program
System
Password
Time
Rating CTRL
PWD Setup
Clear PWD
Input Password
Press Enter key to Clear
Program
System
Password
Time
Rating CTRL
PWD Setup
Clear PWD
Set Password
Confirm Password
Program
System
Password
Time
Rating CTRL
PWD Setup
Clear PWD