Filter
Top Products
BOTTOM VIEW
CONTROL
DVI D-SUB
COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT
AV INPUT
HEADPHONE RF SVHS
Connections (continued)
14
How to connect a DVD Player using Component Video Connections:
Connect the Video cable between the Y, Cb, Cr input jacks on the unit and Y, Cb, Cr output jacks on the DVD player.
Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD player.
Note:
If you connect Y, Cb, Cr terminals, please select C1 or C2 in source select menu. Similarly, if the component
video terminals are Y, Pb, Pr, please select H1 or H2.
As an example, we assume that the component video terminals of your DVD player are YCbCr.
In order to use the sound input for component video playback you will require a Stereo 9mm adapter.
To play DVD
1. Turn on your PDP TV, press SOURCE button on the remote
control.
2. Press VOL+/- to select C1 (YCbCr1) or C2 (YCbCr2).
3. Press ENTER to confirm.
4. Turn on your DVD player, insert a DVD disc and press the Play
button.
Audio
cable
Video
cable
Connect a DVD Player
DVD Player
white (audio L)
red (audio R, Pr/Cr)
Green (Y)
Blue (Pb/Cb)
Rear of the DVD player
YCbCr1
source
A D H1 H2 C1 C2 AV TV