Adjustment in PC (VGA) Mode
34
With working in VGA mode, this unit allows you to perform many adjustments.
Adjusting Picture
Press MENU to display the menu main page.
If the picture menu does not display, press VOL+/- repeatedly
to display picture menu page.
Press CH to select brightness or contrast item.
Press VOL+/- to adjust the value of the item.
Adjusting the Phase and Frequency
Press MENU to display the menu main page.
If the picture menu does not display, press VOL+/- repeatedly
to display picture menu page.
Press CH to select phase or frequency item.
Press VOL+/- to adjust the value of the item.
Press MENU to exit.
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience
blurring, you can obtain a clearer image by adjusting the phase item.
Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is apparent in
the image, try adjusting the frequency item.
Adjusting the Picture Automatically
If you are not satisfied with the picture, you may quickly adjust the picture by using the AUTO button directly.
After the AUTO button is pressed, the message "Auto running" appears on the screen and the picture adjustments
are automatically activated.
4
3
2
1
3
2
1
picture
right/left to adjust brightness
frequency
phase
contrast
brightness
50
50
50
50
right/left to adjust phase
picture
frequency
phase
contrast
brightness
50
50
50
50