Palsonic TFTV1920D Flat Panel Television User Manual


 
Troubleshooting
36
SYMPTOM CHECK ITEM
The player cannot play.
Make sure disc tray is closed
Make sure disc is loaded in.
Make sure disc is loaded correctly.
Make sure disc is not dirty or warped.
Make sure the player’s region code is the same as region code
of DVD disc.
Make sure water condensation has not occurred.
Take out disc and leave the player on for at least one hour
when water condensation occurs.
There is no sound.
Make sure system connection is correct.
Make sure the power of speakers is turned on.
Make sure the sound setup of DVD disc is correct.
Make sure disc is not dirty or warped.
Clean or replace the disc.
Make sure the unit is turned on and is in correct video mode.
Make sure system connections are correct. If it is not, access
the setup menu and select the correct system.
Cannot continue to play and
play a section repeatedly.
Make sure it is not in A-B repeat status.
Press A-B button to cancel it.
Make sure disc is not dirty or damaged.
Clean the disc or skip selection.
There is no picture or the picture
moves up and down Unsteady.
The remote control does not
work.
Make sure there are no obstructions between the remote
control and the player.
Make sure the remote control is pointing at the player.
Make sure batteries are inserted and the polarity is correct.
Make sure battery is not weak.
Replace the weak battery.
Other Notes:
Static or other external interference may cause the player to behave abnormally. In this occurrence,
unplug the power-supply cord from the outlet and plug it in again to reset the player. If the problems
persist, then please disconnect the power and consult a qualified technician.