Memorizing the Channels
Auto Tuning
SELECT
MOVE
MENU
RETURN
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
File System
1
Press MENU. Press 3or4to select Channel menu, press 6
to access.
All ATV/DTV channels available in your area will be searched and
stored into memory. Please wait until the searching is complete.
During the process, if you want to skip, press MENU. To exit
searching, press EXIT.
Auto Tuning
3
Highlight Auto Tuning item, and press 4or OK to access.
2
4
5
Now a pop-up screen opens with Australia as default country
and Start is highlighted. Now simply press OK to begin the auto
tuning.(If you want to cancel, press4to select Cancel and
press OK.)
Auto Tuning will completely re-tune the TV and can be used to update the channel list.
It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channels
and settings, e.g. locked channels, will be lost.
Note:
As new services are broadcast, it will be necessary to retune the TV in
order to view them.
SELECT
MOVE
MENU
RETURN
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
File System
Auto Tuning
Country selection
Australia
Cancel
Go to Input Source menu and select ATV or DTV first.
1
2
3
4
ATV Manual Tuning
Programme Edit
File System
Auto Tuning
DTV Manual Tuning
DTV Manual Tuning
Please select channel then
Press OK to search
Bad
Good
Normal
UHF CH
23
SELECT
EXIT
This feature is available for service engineers or can be used for direct
channel entry if the multiplex channel is known.
Highlight UHF CH item, press 3or4 button to select your
desired multiplex number.
In Channel menu, press 6or5 to select DTV Manual Tuning,
then press4or OK to access.
Press OK to begin the search for that multiplex.
At the bottom of the menu screen the DTV Signal strength bar
is displayed. You can make use of it to check how strong your
DTV signal is and whether you need to adjust your antenna. The
higher the signal strength is, the less likely you are to experience
picture degradation.
When the multiplex is found, any channels that are not currently
in the channel list will be added and the channel information will
be updated.
During the process, you can press MENU or EXIT to exit the
search.
Note: If the Lock System is On, Auto Tuning/DTV manual tuning/ATV manual tuning can not be operated without
password. For details, please see <Setting Child and Rating Locks> section.
When in PVR recording/time shifting, Channel menu can not be accessed.
DTV 4
Radio 2
MENU
SELECT
MOVE
MENU
RETURN
DTV manual tuning - digital only -
ChannelLockPicture OptionTimeSound
ChannelLockPicture OptionTimeSound
ChannelLockPicture OptionTimeSound
19
Start