Filter
Top Products
1/2
SIGNAL
EXTENDED LIFE SETTINGS
SCREENSAVER
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF
OFF
OSD LANGUAGE ENGLISH
(
US
)
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
SCREENSAVER
START
FUNCTION
SCROLLING BAR ONLY
PRESENT TIME OF DAY 99:99
MODE
OFF
37
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
FUNCTION selection
2
3
1
4
Press to display the SET UP menu.
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
SCROLLING BAR ONLY
OVERLAY SCROLLING BAR
NEGATIVE IMAGE
WHITE SCREEN
MODE selection
START setting
5
When the MODE is set to ON, press to select START.
Press to start SCREENSAVER.
The menu screen will disappear and the SCREENSAVER will be activated. To stop the
SCREENSAVER under ON, press the R button or any buttons on the main unit.
Note: When the display is turned off, the SCREENSAVER will be deactivated.
Press to select the
MODE.
Press to select each
mode items.
SCREENSAVER (For preventing image retention)
Off
INTERVAL
: Operates when SHOW DURATION and SAVER
DURATION are set up and those times arrive.
TIME OF DAY
: Operates when START TIME and FINISH TIME
are set up and those times arrive.
STANDBY AFTER SCR SAVER
: Operates while SCREENSAVER DURATION,
and display enters standby mode.
ON : Operates when START is selected and the
ACTION (
) button is pressed.
NEGATIVE IMAGE : A negative image will be displayed on the screen.
SCROLLING BAR ONLY :
A white bar will scroll from left to right. The image won't be displayed.
OVERLAY SCROLLING BAR
: The brightness of the image will be decreased and a white bar
will scroll on it.
WHITE SCREEN : The whole screen will be white.
Note: OVERLAY SCROLLING BAR is not effective during two screen display.