Filter
Top Products
32
Setup Menus
603 V-MUTE SEL
0000
0001
N-MUTE
GRAY
For setting whether to mute the video output signal when a blank part of
the tape has been detected during playback.
0: The video output signal is not muted (the image is frozen).
1: The video output signal is muted (the screen is turned gray).
620 DOWNCON
MODE
0000
0001
0002
0003
0004
FIT_V
FIT_H
FIT_HV
14:9
13:9
For setting the image processing which is to be performed during down-
conversion.
0: Side cut mode
1: Letter-box mode
2: Squeeze mode
3: Semi letter-box mode 14:9
4: Semi letter-box mode 13:9
<Note>
While the setting is being adjusted, the sound output will be muted;
however this is normal and not indicative of a problem. When the
adjustment is finished, sound will be output.
672 V OUT SETUP
0000
0001
0002
0003
THRU
ADD22L
ADD21L
ADD20L
For setting the setup processing for the composite output signal.
0: The original signal is output as is.
1: A 7.5% setup is added from line 22 of the output signal and output.
2: A 7.5% setup is added from line 21 of the output signal and output.
3: A 7.5% setup is added from line 20 of the output signal and output.
645 D/C ENH
0000
0001
OFF
ON
For setting whether to enhance the contours during down-conversion.
0: The contours are not enhanced.
1: The contours are enhanced.
673 EDH
0000
0001
OFF
ON
For setting whether to superimpose EDH onto the SD SDI output.
0: EDH is not superimposed.
1: EDH is superimposed.
VIDEO
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining denotes the factory mode.