Filter
Top Products
33
Setup Menus
700 AUDIO IN SEL
0001
0002
ANA
SDI
For setting the audio signal input (for all the channels at the same time).
1: Fixed to the analog signal input.
2: Fixed to the SDI signal input.
<Note>
When analog signals are input, they are recorded on the tape’s audio
tracks listed below depending on the channels to which they are input.
CH1 input 5 CH1 and CH5 tracks
CH2 input 5 CH2 and CH6 tracks
CH3 input 5 CH3 and CH7 tracks
CH4 input 5 CH4 and CH8 tracks
701 CH1 IN LV 0000
0001
0002
0003
4dB
0dB
–20dB
–60dB
For setting the reference level of the analog audio input (CH1).
702 CH2 IN LV 0000
0001
0002
0003
4dB
0dB
–20dB
–60dB
For setting the reference level of the analog audio input (CH2).
703 CH3 IN LV 0000
0001
0002
0003
4dB
0dB
–20dB
–60dB
For setting the reference level of the analog audio input (CH3).
704 CH4 IN LV 0000
0001
0002
0003
4dB
0dB
–20dB
–60dB
For setting the reference level of the analog audio input (CH4).
706 CH1 OUT LV 0000
0001
0002
4dB
0dB
–20dB
For setting the reference level of the analog audio output (CH1).
707 CH2 OUT LV 0000
0001
0002
4dB
0dB
–20dB
For setting the reference level of the analog audio output (CH2).
708 CH3/L OUT LV 0000
0001
0002
4dB
0dB
–20dB
For setting the reference level of the analog audio output (CH3/L).
709 CH4/R OUT LV 0000
0001
0002
4dB
0dB
–20dB
For setting the reference level of the analog audio output (CH4/R).
AUDIO
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining denotes the factory mode.