Panasonic AJ-HD2000 VCR User Manual


 
12
HOME menu displays
Setting and checking the cue time
(1) Press the center cursor key.
The time code display now appears in reverse video.
(2) Press the [
4
] cursor key.
The cue time now appears in reverse video.
(3) Press the center cursor key again so that the cursor is made to serve as a column cursor,
and then use the number keys to input the value.
(4) Press the ENT key.
The cursor is now cleared. (This completes the setting of the cue time.)
(5) Press the PREROLL button.
The cue time on the tape is searched, and the tape is prerolled for the cue time, after which
it stops.
When the ENTRY button is pressed, the tapes current position is automatically input.
Pressing the F key and PREROLL button at the same time in step (5) initiates the search op-
eration, and the tape stops at the entered cue point.
Center cursor key
Cursor key
LTCR
10 : 00 : 00 : 00
CUE TIME
HMSF
LTCR
10 : 00 : 00 : 00
0 0 4 1 0
7 0
4
CUE TIME
00 H 41 M 07 S 04 F