Filter
Top Products
– 157 –
AUDIO TEST menu
This menu is displayed by pressing the following keys: >
F3TEST
F13
F12
F11
F10
F9
F8F7F6F5F4F3F2F1
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
CH-1
CH-2
CH-3
CH-4
CUE
MONI.L
MONI.R
EXIT
REF.LEV
IMPED.
——
OUT LEV.
IN LEV.
Description
Sets the CH1 analog input/output reference level.
Sets the CH2 analog input/output reference level.
Sets the CH3 analog input/output reference level.
Sets the CH4 analog input/output reference level.
Sets the CUE input/output reference level.
Sets the monitor L channel output reference level.
Sets the monitor R channel output reference level.
Returns the VTR to the TEST menu screen.
Sets the PCM audio reference level. (This can be done only in
the servicing engineer mode.
≥When the F9 and F keys are pressed together, the reference
level (Fs) toggles between j18 dB and j20 dB.
Sets the input impedance. (This can be done only in the
servicing engineer mode.)
≥When the F10 and F keys are pressed together, the input
impedance is toggled between 600 ohms and HIGH.
Sets the analog output reference level.
≥When the F12, BS and F keys are pressed together, the names
of the F1 to F7 menus are displayed, and switching between
them is acknowledged.
Sets the analog input reference level.
≥When the F12, BS and F keys are pressed together, the names
of the F1 to F5 menus are displayed, and switching between
them is acknowledged.