Panasonic AJ-HD3700A VCR User Manual


 
162
SERVO TEST menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
TORQUE
Reel torque adjustment.
DATA SEND
Torque data forwarding.
MEASURE
(Measure)
AT
AT head adjustment.
METER
PG SHIFT
PG shifter adjustment.
ADJ RATE
Adjust rate.
EXIT
MECHA
Mechanical adjustment.
TRACKING
Tracking adjustment.
X VALUE
BIMORPH INIT
Removal of hysteresis at
AT voltage element.
ADJ ENABLE
Description
Key for adjustment by service personnel.
Key for adjustment by service personnel.
Key for adjustment by service personnel.
Key for adjustment by service personnel.
ERROR: Displays inner error level.
ENV: Displays envelop level.
Key for adjustment by service personnel.
Key for adjustment by service personnel.
Returns the VTR to the TEST menu screen.
Key for adjustment by service personnel.
Under normal conditions, tracking adjustment is not necessary.
Adjust if there are tracking discrepancies while editing.
VAR: Tracking is adjusted manually. Refer to Manually
adjusting the tracking (page 106).
FIX: Tracking is fixed at the center position of the
manual adjustment.
OPT. ONCE: Tracking is optimized only once while the tape is
playing up to the IN point during the first editing
after the cassette has been inserted. Thereafter,
optimization does not take place. However,
optimization can be performed again. Refer to
Automatically adjusting the tracking (page 100).
OPT. AUTO: Tracking is optimized while the tape is playing up
to the IN point with each editing. Refer to
Automatically adjusting the tracking (page 105).
Key for X value adjustment by service personnel.
Key for adjustment by service personnel.
Key for adjustment by service personnel.