Filter
Top Products
– 19 –
TEST IC CARD menu
Description
User file management takes place using IC card.
When the F key is pressed, transfer is made to TEST IC CARD
USER FILE menu.
≥There is a load/save function for current (present deck status)
and all registered files.
≥When user file is forwarded to deck, whether SYS_H and
SYS_C should be sent together can be selected.
100 CUE_POINTS (MULTI_CUE) can be loaded/saved to IC
card.
When the F key is pressed, transfer is made to MULTICUE
menu.
≥Whether to send all at once or by page can be selected.
Function available for memory of deck mode, time code, type
and date/time when warning appears.
When the F3 key is pressed, the VTR is transferred to the TEST
IC CARD ERROR LOG menu.
≥Function available for 50-step memory data.
≥When memory buffer becomes full, there is a function for
switching to erasure of old material and renewal of new
warning.
≥Function available for memory storage of this data on IC card.
≥Function available to monitor IC card data.
Returns the VTR to the TEST menu screen.
IC card is formatted. Please note that all data on the IC card is
destroyed.
When the F key is pressed together with C key and F13
(FORMAT) key, the IC card is formatted.
Key
F1
F2
F3
F4–F7
F8
F9–F12
F13
Key designation
USER_FIL
MULT_CUE
ERR_LOG
——
EXIT
——
FORMAT
ONoteN
Avoid installing an IC card formatted by this unit in the AJ-HD2000/2700 or any other model.
Conversely, avoid installing an IC card formatted by any other model in this unit.
The file structure used for these cards is different from one model to another, and this may give rise to
problems in the VTR’s operation.