Filter
Top Products
24
Maintenance and inspections
≥ Wipe off any dust or dirt on the monitor and LCD panel with a soft cloth.
For stubborn dirt or stains, wipe the monitor and LCD panel with a cloth that has been lightly dampened with well-diluted
kitchen detergent and wrung out thoroughly, then finish it off with a dry cloth. The monitor may malfunction if even one
drop of water gets into the internals.
≥ Do not use benzine, paint thinners, etc. to clean the monitor.
They may discolour the monitor’s surfaces or cause the paint to peel off.
≥ Do not spray detergent or other cleaners directly on the monitor or LCD panel.
The monitor may malfunction if even one drop of water gets into the internals.
In order to ensure that this video component will provide many hours of trouble-free operation, provide the appropriate
maintenance and servicing at periodic intervals so that the monitor’s functions will be kept in perfect working order at all
times. In order to ensure that the monitor’s functions will perform to the best of their ability for a long time to come, be
absolutely sure to conduct the maintenance and inspections described here.
1. Necessity for periodic maintenance and
servicing
A backlight power supply is used in this LCD monitor.
This part (which is a consumable) will deteriorate over
time and lead to a reduced level of performance and
failure.
For this reason, do not confine the maintenance activities
to the kind of after-sale servicing which is performed when
the usual failures have occurred. The user should know
that it is important to follow through with comprehensive
servicing which involves periodic maintenance and
servicing aimed at keeping up the performance that the
monitor is designed to provide and preventing sudden
failures caused by consumable parts, etc.
2.
Maintenance timeframe and implementation
item
The maintenance implementation time given below is
provided as a standard guideline, and it does not
represent the service life of the part concerned. It should
also be borne in mind that the period over which the part’s
performance will deteriorate differs according to the
operating environment and method.
Part Quantity
Backlight
Periodic maintenance/inspection and time (hours)
Replace every 38,000 hours.1