Filter
Top Products
9
Supplying the power
An Anton Bauer, V-mount or other such type of battery pack or an AC power source can be used to power this monitor.
1
Install the Anton Bauer type of battery pack.
Battery pack
1
Remove the battery holder.
Battery holder
2
Install the accessory metal battery mount.
Metal battery mount
3
Secure the V-mount adapter using the four screws, and
then secure the two screws of the connector section.
V-mount adapter
This connector is not used.
2
Insert the battery pack and slide it in the direction of the
arrow.
<Reference>
To remove the battery pack, slide it in the opposite direction
to the one in which it was attached while keeping the
release lever on the battery holder pulled down all the way.
Release lever
Using the Anton Bauer battery
pack
Using a V-mount battery pack