Panasonic BT-LT2600 Flat Panel Television User Manual


 
13
You can set FUNCTION display in the menu.
When “FUNCTION DISPLAY” (J page 22) is “ON”
and either [FUNCTION1] or [FUNCTION5] is
pressed, the unit displays the status of the
FUNCTION item set.
The display disappears if remains idle for 2 seconds.
The operational status is displayed in “XXXXX” (J
page 23 “Operation items displayed when a
FUNCTION button is used”).
When the signal is SDI, the audio level is displayed
on the white skeleton bar meter.
You can switch the level display on and off, and set
the number of displayed channels using the menu.
The 0 dB line and channel display can be switched
on and off from the menu.
This is displayed when the menu is used.
The display disappears if remains idle for 2 minutes.
The display position can be changed (J page 21
“MENU POSITION”).
Function display
F1:MARKER
F2:WFM
F3:LEVEL METER
F4:PIXEL TO PIXEL
F5:PIXEL POS.
XXXXX
Audio level meter display
11
33
55
77
22
44
66
88
Level
display
0 dB
line
Channel
display
Menu display
MENU
FUNCTION
HOURMETER
[MAIN MENU]
Displays the operation explanation for the
menu button.
How to Use the On Screen Menu (continued)