Panasonic DMP-B100 Blu-ray Player User Manual


 
Getting started
VQT2H71
9
1 Turn the unit on and off (> 12)
2 Switch the drive to playback (> 14)
3 Basic operations for playback (> 14 – 16)
4 Use according to the instructions on the screen
5 Show Top menu/Direct Navigator (> 14)
6 Selection/OK, Frame-by-frame
7 Show the sub menu
8 Select title numbers, etc./Enter numbers (> 16)
9 Cancel the values that were entered
10 Mute the sound
11 Adjust the volume (> 14)
12 Erase the screen
13 Show FUNCTION MENU (> 12)
14 Show Pop-up menu (> 14)
15 Select audio (> 17)
16 Return to previous screen
17 Show on-screen menu (> 22)
18 Show status messages (> 17)
19 Turn the unit off automatically (> 12)
20 Change the screen settings (> 13)
21 Change the setup of this unit (> 24)
Insert the button-type battery (included)
1 Pull out the holder.
2 Insert the battery and return the holder.
Keep the button-type battery out of reach of children to
prevent swallowing.
Range of use
The distance and angles are approximate.
Remote control
ヷヰロ
1
3
6
7
5
4
8
9
2
17
12
19
21
20
11
10
13
14
15
16
18
To select: Press up, down, left, or right ([3, 4, 2, 1])
To enter: Press [OK]
Frame forward / Frame backward:
(While paused) press left or right ([2;][;1])
Bottom
Pull out while pressing here
_
facing up
Lithium battery: CR2025
Remote control
signal sensor
Within 30 degrees angle
either left or right
Within 20 degrees
angle either up or
down
Remote control transmitter
Within 7 m (23 ft.) in front
DMPB100P-VQT2H71_eng.book 9 ページ 2009年12月24日 木曜日 午後4時58分