Filter
Top Products
Settings
29
VQT3W08
∫ Still Mode (paused video)
Select the type of picture shown when you pause
playback.
∫ Seamless Play
The chapter segments in playlists are played
seamlessly.
≥ Select “On” when the picture freezes for a
moment at the chapters segment in playlists.
∫ Sound Effects (> 27)
∫ Dialog Enhancer (> 27)
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ “Auto” is effective only when playing Dolby
TrueHD.
∫ Digital Audio Output
Tap to show the following settings:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥ Not making the proper settings may result in
noise.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
¾HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥ Select “Off” when the TV is connected to this
unit via HDMI AV OUT, and this unit is also
connected to other devices, such as an
amplifier/receiver via DIGITAL AUDIO OUT.
∫ PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz for the PCM output from the
DIGITAL AUDIO OUT.
≥ If “On” is selected, the signals that are
converted to 48 kHz are output.
≥ If “Off” is selected, and the connected
equipment does not support 96 kHz, the sound
will not be output normally.
≥ Signals are converted to 48 kHz despite the
settings in the following cases:
– when the signals have a sampling frequency
of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥
Select “Surround encoded”, when the connected
equipment supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
Auto
Automatically selects the type of
picture shown.
Field
Select if jittering occurs when “Auto” is
selected.
Frame
Select if small text or fine patterns cannot
be seen clearly when “Auto” is selected.
Audio
DMP-BBT01_VQT3W08 _eng.book 29 ページ ２０１２年４月６日 金曜日 午後３時０分