Filter
Top Products
8
SQT0080
Control reference guide
When other Panasonic devices respond to the
remote control of the unit, change the remote
control code. (> 28)
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers or
characters
4 Cancel
5 Basic playback control buttons (> 17)
6 Show Closed Caption setup screen
(> 23, 26)
7 Show Pop-up menu/Top menu (> 17)
8 Show Option menu (> 22)
9 Colored buttons (red, green, yellow, blue)
Used for various purposes depending on the
display.
10 Transmit the remote control signal
11 Open or close the disc tray (> 14)
12 Show the status messages (> 18)
13 Switch Secondary Video on/off
(Picture-in-picture) (> 23)
14 Change audio (> 17)
15 Show Miracast
TM
screen (> 20)
16 Show the Home Screen of Network Service
(> 19)
17 Exit the Menu screen
18 Show Netflix screen (> 19)
19 Show HOME menu (> 15)
20 [3, 4, 2, 1] :
Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 17)
21 Return to previous screen
1 Disc tray (> 14)
2 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20
e
up and down, 30
e
left and right
3 [BDT460] [BDT361/360_for_U.S.A.]
Blue LED
It is possible to set the LED to turn on/off. (
> 28)
4 SD card slot (> 14)
5 [BDT460] V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off. (
> 28)
6 USB port (> 14)
7 Display
8 Open or close the disc tray (> 14)
9 Basic playback control switches (> 17)
10 Standby/on switch (Í/I) (> 12)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
Rear panel terminals (> 9–11)
1
2
3
5
4
6
7
20
8
9
21
19
17
16
18
15
14
13
12
11
10
SD CARD
108 9
1 2 43 5 6 7
Pull to flip down
the front panel.
DMP-BDT460_360_SQT0080_eng.book 8 ページ ２０１３年１２月１９日 木曜日 午後３時０分