Filter
Top Products
Basic operations
RQT6977
10
Basic play
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
[1] Press [Í] to turn on the unit.
[2] Press [<] to open the drawer and place the
disc(s) label-up on the disc tray(s).
To load discs on the other trays, press
[DISC SKIP] on the main unit.
≥If the disc contains both audio data
(WMA and MP3) and JPEG, check the
“Mixed Disc—Audio & Stills” setting in
the SETUP menu (➜ page 20). Select
“Stills (JPEG)” or “Audio (MP3/WMA)”.
≥Load double-sided discs so the label for
the side you want to play is facing up.
[3] Press [<] to close the drawer.
A disc indicator lights to show a disc is on the tray.
[4] Press [1] (PLAY).
Play begins. It is normal for sound and pictures to take time to start.
[CD] (CD text only) [WMA] [MP3]
Track information appears on the television. Press [SUBTITLE] to
turn the display on or off.
When the disc finishes playing
If the next disc doesn’t start playing, select the disc using the disc
type screen (➜ page 11).
≥If “$” appears on the television
The operation is prohibited by the unit or disc.
≥Discs continue to rotate while menus are displayed even after playing an
item. Press [∫] when you finish to preserve the unit’s motor and your
television screen.
≥To prevent damage
Do not;
–load more than one disc per tray.
–touch the drawer or the carousel while they are in motion
–rotate the carousel by hand.
–close the drawer by hand.
CANCEL
123
456
789
0
10
DISC1 DISC2 DISC3
DISC4 DISC5