Panasonic FP0 Series Universal Remote User Manual


 
19
Control FPWIN Pro
PLC programming software conforming to IEC 61131-3
FP Programmer II Ver. 2
Programming cable
AFC8513D
Programming cable
AFC8523
Programming
software
Connect with RS232C cable
FP0
The most important highlights at a glance:
Reuse of ready made functions and function blocks saves time for programming and debugging
5 programming languages (Instruction List, Ladder Diagram, Function Block Diagram,
Sequential Function Chart, Structured Text)
Convenient comment application in 6 languages (English, German, French, Italian, Spanish, Japanese)
4 standard libraries (IEC Standard library, Matsushita library (M Lib), Pulsed library (P Lib), NC Tool library (NC Tool Lib))
Fewer errors through defined data types and encapsulation
Well-structured through programme organisation units, task-
and project management
Online monitoring and diagnostic
Ethernet and Modem communication for remote-programming,
-service, and -diagnostic
Password protection with different levels
Many additional application libraries available
IEC 61131-3 protects your investments for the future
Control FPWIN Pro Programming
Control FPWIN Pro is the Matsushita programming software according to the international standard IEC 61131-3.
Control FPWIN Pro works with the FP0 as well as any FP series programmable controller. Also, since the tool port is an
RS232C, connection to a PC is easy it only requires a single cable. No converter or adapter is required.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 19
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
10/2004