Filter
Top Products
20
Control FPWIN GR
PLC programming software for easy operation
Program status display
Function instruction list
Classified by type, function
commands can be selected
from the displayed list.
(Simple help included.)
Menu
Program display
Tool bar
Access often-used
functions using icons.
Function bar
Provides information
regarding command
input and confirmation,
on-line/off-line
selection and PLC
mode selection.
I/O comment edit function
Successive I/O comments can
be input for each device type.
Data from Excel and other
applications can be copied and
pasted via the clipboard.
Status display
Displays information
concerning PLC usage
environment and settings,
and detailed information
when an error occurs.
FP Series programming software for Windows.
1. To facilitate operation on site, a mouse is not required for input, search, write, monitor and timer edit operations.
Everything can be accomplished with a keyboard alone.
2. Standard Windows operations, such as copy and paste, are included.
3. Supports all FP series machines. Software created with NPST-GR Ver. 3 or 4 can also be used.
4. Inherits convenient functions developed for NPST-GR.
Features
OS
Required hard disc capacity
Recommended CPU
Recommended installed memory
Recommended screen resolution
Recommended display colors
Windows 95/98/NT (Ver. 4.0 or later)/XP
At least 30MB
Pentium 100MHz or higher
32MB or more
800 x 600 or higher
High Color (16-bit or higher)
Usage environment
Applicable PLC types
*All products on the market are supported.
All FP series types are supported:
FP∑ Sigma, FP0, FP-e, FP1, FP2, FP2SH, FP3, FP10SH, FP-M
Note: FPWIN GR Vers. 2.2 or later is needed to program the FP-e
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 20
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
10/2004