Filter
Top Products
23
ASPECT Controls
Mode
4:3
Zoom
16:9
Just
Panasonic
Auto
Explanation
4:3 will display a 4:3 picture at its standard 4:3 size.
Zoom mode magnifies the central section of the
picture.
16:9 will display the picture at its maximum size but
with sight elongation.
Just mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the center
of the screen so that elongation is only apparent at
the left and right edges of the screen. The size of
the picture will depend on the original signal.
Notes:
(1) Do not allow the picture displayed in 4:3 mode for an extended period, as this can cause a parmanent after-image
to remain on the Plasma Display Panel.
(2) The S-VIDEO terminal on this set can detect specially encoded signals that are compatible with a wide screen
monitor. When a full image from the S-VIDEO terminal of specially encoded video is detected by the set, the screen
size is automatically set to 16:9 mode.
4:3
3
4
Zoom
4
3
16
9
16:9
4
3
16
9
Just
4
3 9
16
Picture
The display will automatically become enlarged
(depending on the picture source), allowing you to
view the picture at its maximum size.
Note:
Panasonic Auto Mode is designed to automatically
adjust the aspect ratio to handle a mix of 16:9 and
4:3 program material. Certain 4:3 program material,
such as stock market data screens, may
occasionally cause the image size to change
unexpectedly. When viewing such programs, it is
recommended that the ASPECT be set to 4:3.
Panasonic Auto
For an elongated image
For a 4:3 image
Image is expanded
416
39
4
3
Changes in accordance
with the Panasonic Auto
mode setting (see page
31)