Panasonic NV-HS880 VCR User Manual


 
4
Menu Operation
[Cursor] (38)
To select items on the menu.
[MENU] (7)
To display the Main menu.
[EXIT] (27)
To exit the menu.
[OK] (24)
To confirm or store the selection.
VCR Operation
When you want to operate the VCR, set the [VCR/TV] (23)
to [VCR].
[VCR-ON/OFF] (1)
To switch the VCR from on to standby mode or vice versa. In
the standby mode, the VCR is still connected to the mains.
[Numeric] (2)
To select the programme positions (1–99) of the VCR.
Example: 9:
19:
To enter a S
HOW
V
IEW
number.
To enter numbers for various settings.
[AV LINK] (35)
To switch the TV from normal TV reception over to the video
playback channel (AV input) (and vice versa).
TV Operation
When you want to operate the TV, set the [VCR/TV] (23) to
[TV].
[TV-ON/OFF] (1)
To switch the TV on from standby mode or vice versa.
On some TVs it is only possible to switch the TV to standby
mode with this button, but not on. In this case, try to turn the
TV on with one of the following buttons:
[Numeric] (2)
[AV] (3)
[Channel] (33)
[Numeric] (2)
To select the programme positions (199) on the TV.
[AV] (3)
To select the desired AV input on the TV.
[Channel] (33)
To select the desired programme position (TV station) on the
TV.
[TV ASPECT] (35)
To switch the screen format between the wide-screen and
other formats.
[VOLUME] (32)
To adjust the volume of the TV.
[TV/TEXT] (34)
To switch between normal TV mode and teletext mode.
[Teletext] (37)
If your TV is equipped for Teletext reception, you can use
these buttons to change the teletext information displayed on
the screen and select desired information.
For details, refer to your TVs operating instructions.
Setting the Remote Control to Operate
Your TV
(For NV-HS830 Series)
Only Panasonic TVs can be operated with the provided
remote control. The settings for operating the TV with the
remote control have already been made.
No additional settings need to be performed.
However, some Panasonic TVs can not be operated using
this remote control.
(For NV-HS880 Series)
This setting procedure allows you to operate the TVs of most
brands using the remote control supplied with this VCR.
Some TV models cannot be operated with this remote
control.
1) Set the [VCR/TV] (23) to [TV].
2) Look up your TVs manufacturer in the list of TVs
compatible with the VCRs remote control.
3) While keeping the [TV-ON/OFF] (1) pressed, use the
[Numeric] (2) to enter the manufacturers code.
If there is more than one code listed for that
manufacturer, try the first code.
Be sure to enter the code in two digits.
Example: 01
4) Check whether you can operate the TV correctly with the
VCRs remote control.
1
9
9