Filter
Top Products
8
If you are connecting your VCR to a TV using only RF
coaxial cable, then follow the steps. (RF Connection)
RF Coaxial cable must be connected to watch TV channels.
1) Press the [VCR-ON/OFF] (1) to
turn on the VCR and tune your
TV until the Country setting menu
appears on the TV screen.
2) Press the [Cursor] (38) 3421.
Select the country where you are
using the VCR.
3) Press the [OK] (24).
The VCR’s Auto Setup automatically starts and tunes all
available TV stations and also sets the clock. This takes
about 5 minutes.
• When the indication appears on
the VCR display, the Auto
Setup is complete.
If, after setup, the picture on the video playback channel
is distorted, change the RF output channel on the VCR
to another number.
1) Press the [MENU] (7) for more
than 5 seconds.
The RF output channel number
appears on the VCR display.
The initial setting is channel 36.
2) Press the [Numeric] (2).
Change the RF output channel.
Enter a channel number which differs by 2 or 3 from the
one initially set number. For example, as the original
number is 36, enter 39.
Retune your TV to the VCR’s new RF output channel.
3) Press the [OK] (24) to conclude the setting.
To cancel the Auto Setup before it has finished
Press the [EXIT] (27).
When the clock setting menu appears after Auto Setup
has finished
1) Press the [Cursor] (38) 3421 to set the correct time
and date.
2) Press the [OK] (24) to conclude the setting.
To confirm that the TV stations have been tuned
correctly by the Auto Setup function
See page 18
When no station has been set, confirm all connections
of the VCR again and restart the Auto Setup
See page 19.
When the station names and/or channel numbers have
not been set correctly
See page 18.
Hint:
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
setting menu, the other setting menu appears automatically to let
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF] (1) pressed on the VCR
main unit, not with the remote control.
1
2
3
4
5
6
7
0
1 Aerial Input socket
0
2 Aerial Output socket
0
3 Aerial (not supplied)
0
4 Aerial lead (not supplied)
05 TV (not supplied)
06 Aerial Input socket
07 RF Coaxial cable (supplied)
Country
Belgien
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
Panasonic VCR