Filter
Top Products
24
Settings Using the On-Screen Display
Press [34] to select the item and press [21] to change the
setting.
¬ To exit the settings screen
Press [MENU] twice.
OPTION
0
SLOW/SEARCH
NAVI
TOP MENU
MENU
RETURN
PROG/CHECK
PROG PLAY
DISPLAY
JET REW
TIMER
ENTER
PLAY
LIST
INDEX/SKIP
AV
DIRECT
NAVIGATOR
CANCEL/RESET ANGLE/PAGE
INPUT SELECT
MUSIC w/ PICTURE
PICTURE SPEED
AUDIO
POSITION MEMORY
SETUPZOOM REPEAT
PLAY MODE
A.SRD CINEMA
SUBTITLE
-/-
-
MENU
AUDIO
ENTER
CANCEL/
RESET
DISPLAY
OPTION 1/2
TAPE SELECT [AUTO]
NTSC INPUT SELECT [AUTO]
NTSC PB SELECT [onPALTV]
JET NAVIGATOR [OFF]
DELETE NAVIDATA [NO]
OSD REC [OFF]
OSD [AUTO]
OUT[VHS/DVD] [AUTO]
END :MENU
SELECT:
OPTION 2/2
DUBBING NORMAL AUDIO [L]
MONAURAL [OFF]
END :MENU
SELECT:
e.g. NV-VP31GN
Items Settings (Underlined items are the initial setting.)
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time (lpage 25).
AUTO
: E30, E60, E90, E120, E180 and E240 tapes
E195: E195 tapes
E260: E260 tapes
E300: E300 tapes
NTSC INPUT SELECT
Select the colour TV system used to record NTSC signals.
AUTO
: NTSC [4.43] and [3.58] signals
≥If the tape has not recorded correctly, select 4.43 or 3.58.
4.43: NTSC 4.43 signals
3.58: NTSC 3.58 signals
≥Some programmes on NTSC 3.58 system cannot be recorded
correctly at this position.
NTSC PB SELECT
Select the colour TV system of the TV used to play back a tape
recording NTSC signals.
on PAL TV
: TVs that can receive PAL signals
4.43: TVs that can receive NTSC 4.43 signals
3.58: TVs that can receive NTSC 3.58 signals
JET NAVIGATOR (lpage 20) ON: Jet Navigator data automatically registered.
OFF
: Data not registered.
≥If you select “ON”, “OSD REC” is set to “OFF” automatically.
DELETE NAVIDATA
See page 20 to delete data on a single tape.
NO
ENTER: If you choose this position, press [ENTER] to delete
all the Jet Navigator data.
OSD REC
You can record the present date and time on the same screen
which the picture is recorded.
ON
OFF
≥If you select “ON”, “JET NAVIGATOR” is set to “OFF”
automatically.
OSD (lpage 25) AUTO
: Messages appear on the TV for about 5 seconds
when you press [DISPLAY].
OFF: Messages do not appear.
OUT [VHS/DVD] (lpage 12)
You can set the unit so that the output is automatically switched to
the device which starts playback.
VHS: Only VHS outputs.
MANUAL: VHS output and DVD output are manually switched.
AUTO
: VHS and DVD are automatically switched depending
on the manipulation or the unit operation.
DUBBING NORMAL AUDIO (lpage 42)
Select the audio channel to be recorded on the Normal audio track
when dubbing a bilingual DVD.
L
: To record the sound from left channel
R: To record the sound from right channel
MONAURAL
Select the sound mode. (For NV-VP31GN only)
ON: To record the normal sound during a NICAM
broadcast or if the stereo sound is distorted due to
inferior reception conditions.
OFF
VP31GL.book 24 ページ ２ ０ ０ ３年７月３ ０日 水曜日 午後８時２ ２分