Filter
Top Products
34
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.
Tape Operation
1
Press SEARCH*
in Playback or
Stop mode to
display INDEX
SEARCH screen,
and then press
number keys
to select the
recording number.
• To calculate
number, see below.
Press FF or REW
to start search.
Index Search
Go directly to the desired recording.
• Make each entry within 5 minutes,
or the Index Search mode will be
canceled.
• If Index Search is started very close
to an index mark, that index mark
may not be counted in the search.
2
Play begins at
search end.
To search forward
or back 1 index,
press FF or REW
while screen left is
displayed (10
seconds).
NOTE: indicates start points of each recording.
61572 34
■■
■■
■ To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
17534 62
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
ENTER
I
NDEX
NUMBER
:
1
US
I
NG 1
-
9
KEYS
FOR
W
ARD
SEARCH
:
FF
REVERSE SEARCH
:
REW
NEXT
:
SEARCH
EX
I
T
:
STOP
I
NDEX SEARCH
FOR
W
ARD
SEARCH
:
FF
REVERSE SEARCH
:
REW
I
NDEX SEARCH
FFREW
Notes
To cancel, press PLAY or STOP.