Filter
Top Products
63
For Your Information
DVD/Video CD/CD
Play fails to start even when
PLAY is pressed...
Play starts but then stops
immediately...
Picture is distorted during rapid
advance or rapid reverse...
No Forward/Reverse search
play...
Play does not start even when
title is selected...
Audio soundtrack and/or
subtitle language is not the one
selected at the initial settings...
No subtitles...
Alternative audio soundtrack
(or subtitle) language cannot
be selected...
Angle cannot be changed...
Correction
• This unit cannot play discs other than DVDs, Video CDs and
CDs.
• The disc may be dirty and require cleaning.
• Be sure disc is installed with label side up.
• The picture will be somewhat distorted at times: this is normal.
• Some discs may have sections which prohibit Forward/
Reverse search. (P. 21)
• Confirm the “DVD LOCK” setting. (P. 57)
• If the audio soundtrack and/or subtitle language selected at
DVD initial settings does not exist on the disc, it will not be
accessible.
• Subtitles appear only when available on disc.
• Select “ON” at the “Subtitle language” section (P. 48) to
display subtitles.
• Alternative language cannot be selected with discs which do
not contain more than one language.
• For some discs, alternative language cannot be selected with
the AUDIO or SUB TITLE button. Try selecting it from the DVD
menu if available.
• This function is dependent on software availability. Even if disc
has multiple angles, they may be recorded for specific scenes
only (ANGLE Indicator on unit lights up). (P. 49)
Correction
• Insert the cassette window side up; record tab facing you.
• Completely insert Power Plug into an AC outlet.
• Turn the POWER off and then on, and try ejecting or inserting
the tape again.
• Make sure cassette record tab is intact. (P. 4)
• First, unplug unit. Then, prepare a rigid wire (e.g. an extended
paper clip, etc.) and, applying moderate force, insert it straight
into the hole at the base of the tray. The tray will eject a little.
Now, pull the tray all the way out and remove the disc. (P. 10)
• To enable Quick Play mechanism, the VCR cylinder will rotate
for about 3 minutes. This reduces response time from Stop to
Play mode and from Play to Rewind Search mode.
Miscellaneous
Video cassette cannot be
inserted...
Video cassette cannot be
removed...
Eject does not function or
insertion cannot be done...
Video cassette ejects when a
recording is started, or the
power is turned off for timer
recording...
The disc cannot be removed...
In Stop mode, the VCR motor
(CYLINDER) continues to
rotate...