Filter
Top Products
27
Move a Camera to the Preset Position
Moves a camera to the preset position registered in advance. Registering preset positions is required to perform the
preset function.
Refer to the operating instructions of the connected camera for the descriptions of how to register the preset posi-
tion. It is impossible to register the preset positions of cameras using this unit.
Auto mode Fuction (Auto Pan, etc)
Moves a camera with an auto function set in advance.
Screenshot 1
Display the [CAM] tab.
Step 1
Click the [i] button in the [Preset] box to select a pre-
set number (HOME, 1 - 256) to be moved.
Step 2
Click the [Go] button.
→ The camera moves to the registered preset position
respective to the selected preset number.
Screenshot 1
Display the [CAM] tab.
STEP1
Click the [i] button in the [Auto mode] box to select a
mode (Auto Pan, etc.) to be started.
Step 2
The auto mode function can be performed by clicking
the [ON] button in the [Auto mode] box.
Click the [OFF] button to stop the auto mode function.
Note:
Refer to the operating instructions of the connected
camera for further information about the auto mode
function of the camera.