Filter
Top Products
35
Transmits Camera Images onto an FTP Server
It is possible to transmit images to an FTP server.
Image transmission can be performed at a designated time periodically (FTP SEND BY PERIODIC TIMER) or at an
event occurrence (FTP ALARM SENDING).
Transmit Images from Cameras Periodically
It is necessary to perform the settings on the setup menu in advance to transmit images from cameras to an FTP
server periodically.
The settings relating to "FTP SEND BY PERIODIC TIMER" such as FTP server directory, transmission interval,
source camera channel, etc. can be performed on the setup menu (Advanced) ("Comm" - "FTP Setup" - "FTP SEND
BY PERIODIC TIMER").
Select "ON" or "OFF" on the setup menu (Advanced) ("Schedule" - "Time Table" - "FTP SEND PERIODIC TIMER")
whether or not to transmit images periodically.
Refer to the Setup Instructions (PDF) for setup.
Note:
When the image compression method of the camera used for the camera channel selected for "Channel to
Send" (of "FTP Send by Periodic Timer" on the "FTP Setup" menu) is "MPEG-4", images will not be transmitted.
Transmit Images from Cameras at an Event Occurrence
It is necessary to perform the settings on the setup menu in advance to transmit images from cameras to an FTP
server at an event occurrence.
The settings relating to "FTP ALARM SENDING" such as FTP server name, "Duration-Pre", "Duration-Post", etc.
can be performed on the setup menu (Advanced) ("Comm" - "FTP Setup" - "FTP ALARM SENDING").
Select "ON" or "OFF" on the setup menu (Advanced) ("Schedule" - "Time Table" - "FTP ALARM SENDING")
whether or not to transmit images at an event occurrence.
Refer to the Setup Instructions (PDF) for setup.