Filter
Top Products
58
EVT-**% or
EVT-FULL
CPY-**% or
CPY-FULL
CAM cc ERR
LINK_ERR_0p
CAM cc SD ERR
HDD-5ERR
EVENT-HDD FULL
HDD-6ERR
COPY-HDD FULL
NET-3-0ERR
CAMERA cc ERROR
NET-1-p ERR
NW LINK ERROR
NET_5-0 ERR CAM-
ERA cc SD ERROR
(or no indication)
The HDD is almost full or
completely full.
Communication with the
network camera is unstable,
or no network camera is
connected.
The unit is disconnected
from the network.
An SD card memory error
occurred. The SD memory
card may be not detected,
or there is no available
space on the SD memory
card on the camera.
Initialize or replace the HDD. (*1)
Check the communication status between
this unit and the network camera.
Check the network connection.
Check the SD memory card and the settings
on the camera.
Contact the dealer.
After replacing the faulty disk, the error sta-
tus will be canceled. (*1)
SMART u-d HDD-1-u-d ERR
HDD WARNING
The HDD may be malfunc-
tioning and may work incor-
rectly.
Contact the dealer to replace the HDD. (*1)
H.METER u-d HDD-2-u-d ERR
HDD HOUR METER
The set time for the hour
meter has passed.
It may be reaching the end
of the HDD’s lifetime.
If this error occurs frequently, contact the
dealer to replace the HDD. (*1)
V-ERROR vvv
REMOVE u-d HDD-3-u-d ERR
HDD REMOVED
Data on each recording
area is lost by the
"REMOVE" error, etc.
The HDD has been
unmounted from the system
automatically.
Contact the dealer.
After replacing the faulty disk, the error sta-
tus will be canceled. (*1)
W-ERR u-d Failed to write/read data on
the HDD.
The HDD may be malfunc-
tioning.
If this error occurs frequently, contact the
dealer to replace the HDD. (*1)
R-ERR u-d
HDu-d 1DOWN HDD-10 ERR
RAID5 1DOWN
A HDD of RAID is failed. Contact the dealer.
After recovering/replacing the faulty disk, the
error status will be canceled.
HDu 2DOWN
SKIP u-d
Please Setup on
DISK CONFIG
MENU
The unit is currently inoper-
able since the disk array is
changed.
Display "DISK CONFIG MENU" and initial-
ize or replace the hard disk.
When the Error Log is Displayed
Do the following when the error log is displayed on the LCD.
Error Log Indication on the
LCD
Description Solution