Panasonic PT 56DLX76 Projection Television User Manual


 
25
Getting Start ed
RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed
correctly, or a black background may be displayed.
Notes:
• A vertical frequency of 60 Hz (signal with a * mark) is recommended.
• To view a WXGA picture, a setting change is necessary. Please refer to “PC Adjust” on page 45.
• The D-SUB 15P connector can accept RGB (H-V sync separate).
• When an external video processor/scaler is used, it must have RGB (H-V sync separate) output.
Mode type
Signal data
No. of dots
(H × V)
Horizontal frequency
(kHz)
Vertical frequency
(Hz)
Personal Computer Signals
VGA400 (70 Hz) 640 × 400 31.47 70.08
* VGA480 (60 Hz) 640 × 480 31.47 59.94
Macintosh 13˝ 640 × 480 35.00 66.67
VGA480 (75 Hz) 640 × 480 37.50 75.00
* SVGA (60 Hz) 800 × 600 37.88 60.32
SVGA (75 Hz) 800 × 600 46.88 75.00
SVGA (85 Hz) 800 × 600 53.67 85.06
Macintosh 16˝ 832 × 624 49.73 74.55
* XGA (60 Hz) 1 024 × 768 48.36 60.00
XGA (70 Hz) 1 024 × 768 56.48 70.07
XGA (75 Hz) 1 024 × 768 60.02 75.03
* WXGA (60 Hz) 1 280 × 768 47.78 59.87