Filter
Top Products
41
Basic Operation
Lets you choose the aspect mode based on the
format of the received signal and your preference.
The aspect mode changes each
time ASPECT is pressed.
Notes:
• When a 1080p (HDMI) signal is received, the aspect is set to
FULL and cannot be changed.
• When input mode is CARD, the aspect is set to 4:3 and
cannot be changed.
• If the mode selected does not match the aspect ratio of the
input signal, the original picture quality may be affected.
• If using this Projection Display in places, such as cafes or
hotels, with the aim of displaying programs for a commercial
purpose or for public presentation, please note that by using
the aspect ratio (16:9) selection function to change the
aspect ratio, you may be infringing on the rights of the original
copyright owner of that program under copyright protection
laws.
• If a 4:3 picture is projected in wide screen, distortion may
occur around the edges so that part of the picture may no
longer be visible. We recommend viewing in 4:3 mode so you
can enjoy the picture as it was intended to be seen.
• During PC input, the mode switches between 4:3 and
FULL only.
4:3 FULL
FULL ZOOM
JUST 4:3
ASPECT Con trols
Changing the Aspect Mode
• When an HD signal (1080i/720p) is received, the mode
switches between FULL, H-FILL, JUST, and ZOOM.
ZOOM JUST
FULL H-FILL
Mode Picture Ex pla na tion
JUST
JUST
9
16
JUST mode will display a 4:3
picture at max i mum size, but
with aspect correction applied
to the center of the screen
so that elongation is only
apparent at the left and right
edges of the screen. The size
of the picture will depend on
the original signal.
4:3
4:3
3
4
4:3 mode displays a 4:3
picture at the standard 4:3
size.
ZOOM
ZOOM
16
9
ZOOM mode magnifies the
central section of the picture.
FULL
FULL
16
9
FULL mode displays the
picture at maximum size,
but with a slightly elongated
appearance.
H-FILL
H-FILL
16
9
H-FILL mode enlarges a 4:3
image horizontally to the sides
of the screen. The side edges
of the image are cut off.