Filter
Top Products
40
The remote control
does not work
•
Are the batteries installed correctly? (p. 6)
•
Has the battery run down?
•
Has the TV POWER button been turned On?
•
To operate external equipment of other
manufacturers, register the
remote control codes. (p. 29)
Pictures from external
equipment are distorted
when the unit is
connected via HDMI
•
Is the HDMI cable connected properly?
(p. 20-21, 30-31)
•
Turn Off the TV unit and equipment,
then turn them On again.
•
Check an input signal from the equipment.
(p. 20-21, 30-31)
•
Use a device compliant with
EIA/CEA-861/861B.
White spots or
shadow images
(noise)
•
Check the position, direction,
and connection of the aerial.
Interference or
frozen digital
channels
(intermittent sound)
•
Change the direction of antenna for
digital channels .
•
Check “Signal meter” (p. 24).
If the signal is weak, check the
antenna and consult your local
dealer.
Before requesting service or assistance, please follow these simple guides to
resolve the problem.
If problem still persists, please contact your local Panasonic dealer or
Panasonic Service center for assistance. For details (p. 44, 45, 46)
For additional assistance, please contact our website at:
www.panasonic.com/contactinfo
FA Q