Filter
Top Products
7
Quick Start Guide
Accessories/Options
Attaching the pedestal to the plasma television
Caution
Do not use any television or displays other than those supplied in the package.
•
Otherwise the unit may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During setting-up, make sure that all screws are securely tightened.
•
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the plasma television, and it might fall over and become damaged, and personal injury
may result.
Use the accessory fall-prevention brackets to secure the plasma television.
•
If the unit is knocked or children climb onto the pedestal with the Plasma TV installed, the plasma television may
fall over and personal injury may result.
Two people are required to install and remove the television.
•
If two people are not present, the television may be dropped, and personal injury may result.
Accessories for pedestal assembly
1
Band (2)
2
Screw (2)
3
Wood screw (2)
4
Clamp (2)
A
Assembly screw (4)
B
Assembly screw (4)
(Black screw)
C
Pole (2)
D
Base (1)
Accessories for pedestal security
1
Assembling the pedestal
1. Installing the poles 2. Securing the poles
Insert the poles
C
into the left and right holes
in the underside of the base
D
so that they fit
securely as shown in the illustration above.
Use the assembly screws
A
to secure the poles
firmly to the bottom of the base.
Note
Forcing the assembly screws the wrong way will
strip the threads.
M5 x 20 M5 x 30
M4 x 10
Front
For 42˝ Plasma
television (Outside)