Filter
Top Products
30
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
1 Insert a tape.
• The unit power comes on automatically.
2 Press PLAY to play a tape.
• If tape has no record tab (see page 8), auto
play begins.
To prevent tape jam,
remove loose or
peeling labels from
tapes.
a. Press FF/SLOW+ or REW/SLOW-.
b. Press PLAY to release.
After search has begun, each additional
press of FF or REW changes speed.
• FF and REW search speed may vary
depending on current tape position.
• After 10 minutes in search mode, unit
returns to Play mode to protect the tape
and the video heads.
Record tab
a. Press STILL/PAUSE.
b. Press PLAY to release.
a. Press STILL/PAUSE.
b. Press FF/SLOW+ (increases
speed) or REW/SLOW- (decreases
speed) in Still mode.
c. Press PLAY to release.
a. Press STILL/PAUSE.
b. Press STILL/PAUSE in Still mode.
c. Press PLAY to release.
Press STOP.
Rapid Rewind tape
Press REW/SLOW- in Stop mode.
Rewinds a T-120 tape in approx. 1
minute.
Rapid Fast forward tape
Press FF/SLOW+ in Stop mode.
Eject tape
Press EJECT on the remote or
STOP/EJECT on the unit.
• To reduce picture noise, see “Manual Tracking
Control” on page 37.
Playback a Tape
Forward/Reverse scene search
Still (Freeze) picture
Slow Motion picture
Frame by Frame picture
Stop a Tape
• These features work best in SLP mode.
• After 3 minutes in Still or Slow mode, unit stops
to protect the tape and the video heads.
Basic VCR Operation -Playback-
Note
NUMBER
keys
CH▲▼
ACTION
SET
SELECT
▲▼◄►
EJECT
DISPLAY
STOP
STILL / PAUSE
AUDIO
REC
PLAY
FF/SLOW+
SPEED
REW/SLOW-
Notes
If a remote control button does not work
when pressed, press the TV/VCR button
on the remote and try the button again.
TV/VCR
Insert a
tape
CH
▲▼
REC REC
Indicator
PLAY /
REPEAT
STOP /
EJECT