Panasonic SC-VK72D DVD Player User Manual


 
Discs — Basic play
RQT8169
12
Discs Basic play
3 Press [1][5] to play
the disc.
You can also press
[:, DVD/CD] if the current
disc is your desired disc.
Press [c, DISC CHANGE] and
then [1][5].
Press [c, DISC CHANGE] again
to close the tray.
You can also remove a disc while
another is playing.
If you select a disc which is being
played, play stops and the tray
opens.
:, DVD/CD
Change a disc
in another tray
1 Press [c, OPEN/CLOSE] to open the tray.
The unit comes on.
To load discs in other trays, press [1]–[5] to select the tray and press
[c, OPEN/CLOSE] to open the tray.
You can load up to 5 discs (one per tray).
Load double-sided discs so the label for the side you want to play is facing up.
RAM
Remove the disc from its cartridge before use.
Do not pull or push the tray with your hand.
2 Press [c, OPEN/CLOSE] to close the tray.
Note
Discs continue to rotate while menus are displayed. Press [L STOP] when you finish to preserve the unit’s motor and your television screen.
Total title number may not be displayed properly on +R/+RW.
Check the disc location
Press [DISC CHECK] during play.
Press again to close the trays.
To check the location of the 12 cm discs.
If a disc is being played, the corresponding tray will not open.
Do not remove or insert disc(s) during a disc check.
Do not pull out the trays during a disc check.
Stop
Press [L STOP] during play.
The position is memorized while
“RESUME” is on the display.
Press [:, DVD/CD] to resume.
Press [L STOP] again to clear
the position.
Skip/Search/Slow-motion play
To skip: Press [REW/
44
44
4/g] or [f/
33
33
3/FF].
To search: Hold down [REW/
44
44
4/g] or [f/
33
33
3/FF] during play.
To play in slow-motion: Hold down [REW/
44
44
4/g] or [f/
33
33
3/FF] during pause.
VCD
Slow motion play is for forward direction only.
Search/slow motion play speed increases up to 5 steps.
RQT8169(12_13)new1 4/18/05, 2:19 PM12