Filter
Top Products
3
RQT8169
Safety precautions/Accessories
Placement
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These conditions
can damage the cabinet and other components, thereby shortening
the unit’s service life.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
Power cord protection
Ensure the AC power cord is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock. Do
not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
power cord can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable
gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC power cord
and contact your dealer or an authorized service center. Electric shock
or damage to the unit can occur if the unit is repaired, disassembled or
reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power source
if it is not to be used for a long time.
Safety precautions
Please check and identify the supplied accessories.
AC power supply cord
VK72D
VK92D
VK82D
VK72D
3 Speaker cords
VK72D
1 x short cord
2 x long cords
1 Video cable
1 AM loop antenna
1 FM indoor antenna
Note
The included AC power supply cord is for use with this unit only. Do
not use it with other equipment.
Accessories
For Australia and N.Z.
VK92D
(N2QAJB000141)
VK82D
(N2QAJB000142)
VK72D
(N2QAJB000143)
VK82D
(N2QAJB000140)
For Australia and N.Z.
For Saudi Arabia, Kuwait
and Southeast Asia
Note on AC power supply cord
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differs according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Fuse cover
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
Figure A
Figure B
2. Replace the fuse and close or attach the fuse cover.
For Saudi Arabia and Kuwait
For Southeast Asia
1 Remote control
For Saudi Arabia and Kuwait
2 Batteries for remote
control
For Saudi Arabia and Kuwait
VK92D
VK82D
VK72D
VK92D
VK82D
VK82D
RQT8169(02_03)new 6/1/05, 12:06 PM3