Panasonic SC-VK72D DVD Player User Manual


 
Speaker connections/Video connections
7
RQT8169
3 Speaker cords
1 x short cord: For center speaker
2 x long cords: For surround speakers
VK72D
Video connections
STEP3
77
77
7 Television with COMPONENT VIDEO IN terminals
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
P
R
Y
S VIDEO
OUT
COMPONENT
VIDEO IN
P
R
P
B
Y
Television
(not included)
Back of the
main unit
Video cables
(not included)
Do not connect the unit through a video cassette recorder
Due to copy guard protection, the picture may not be displayed
correctly.
Turn the television off before connecting, and refer to the
television’s operating instructions.
77
77
7 Television with a VIDEO IN terminal
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
P
R
Y
S VIDEO
OUT
VIDEO IN
Video cable
(included)
Television
(not included)
Back of the
main unit
77
77
7 Television with an S VIDEO IN terminal
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
P
R
Y
S VIDEO
OUT
S-VIDEO
IN
S-video cable
(not included)
Television
(not included)
Back of the
main unit
S VIDEO OUT terminal
The S VIDEO terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chrominance (C) and
luminance (Y) signals. (Actual results depend on the television.)
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive output
and provide a purer picture than the S VIDEO OUT terminal.
Connection using these terminals outputs the color difference signals
(P
B/PR) and luminance signal (Y) separately in order to achieve high
fidelity in reproducing colors.
The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
B/PR,Y/B-Y/R-Y, Y/CB/CR).
Connect to terminals of the same color.
To enjoy progressive video
Connect to the component video input terminals on a 480p (or
525p) or 576p (or 625p) compatible television. (Video will not be
displayed correctly if connected to an incompatible television.)
Video cable
R
L
R
L
Gray (+)
Gray
Blue
Blue ( )
Connecting center and surround speakers
Connecting front speakers
Surround speaker (right)
Front speaker (left)
Center speaker
Red (+)
Black ( )
2
3
+
1
Black
Red
3
+
1
2
Be sure to connect only positive (gray) wires to
positive (+) terminals and negative (blue) wires to
negative ( ) terminals. Incorrect connection can
damage the speakers.
Connect the right (R) side in the same way.
Note
Surround speaker (left)
: Blue
+ : Gray
RQT8169(06_07)new 4/20/05, 11:28 AM7