Filter
Top Products
QUICK SETUP/Setting the time/DEMO function
9
RQT8169
The QUICK SETUP screen assists you to make necessary
settings.
Turn on the television and select the appropriate video input on
the television.
1 Press [
::
::
:, DVD/CD] to select “DVD/CD” as the
source.
The unit comes on.
Press [
LL
LL
L] when a disc is in the tray.
2 Press [SHIFT] + [SETUP] to show the QUICK
SETUP screen.
3 Follow the messages and press [
88
88
8,
99
99
9,
; ;
; ;
;,
::
::
:] to
select, then press [ENTER] to make the settings.
Press [RETURN] to go back to the previous screen.
4 Press [ENTER] and then [SHIFT] + [SETUP] to end
the settings.
C
LO
C
K/
TIMER
,
,
,
S
HIF
T
,
DVD/C
D
RET
U
RN
S
ETU
P
,
,
,
,
This is a 24-hour clock.
1 Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
CLOCK
Previous display
RECPLAY
2 (within 7 seconds or so)
Press [
gg
gg
g, REW/
44
44
4] or [
ff
ff
f,
33
33
3/FF] to set the time.
3 Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby
mode.
The time is shown for about 5 seconds.
Note
Reset the clock regularly to maintain accuracy.
Setting the time
STEP7
QUICK SETUP
STEP6
When the unit is first plugged in, a demonstration of its functions
may be shown on the display.
If the demo setting is off, you can show a demonstration by
turning on the demo.
Press and hold [DISPLAY –DEMO].
The display changes each time the button is held down.
DEMO OFF (off) ↔ DEMO ON (on)
You can reduce the power consumed in standby mode by
turning the demonstration off.
DEMO function
DEMO
DI
S
PLA
Y
RQT8169(08_09)new1 4/20/05, 11:28 AM9