Filter
Top Products
-'Is];AIl._.],l,[_._i [.],
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting
the TV unit and HD devices.
HDMI-compatible equipment ('1) with an HDMI or DVl output terminal, such as a Cable or Satellite box or a DVD player, can be
connected to the HDMI connector using an HDMI compliant (fully wired) cable.
@ HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.
@ If the external equipment has only a DVl output, connect to the HDMI terminal via a DVl to HDMI adapter cable (*2).
@ When the DVl to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
@ Audio settings can be made on the "HDMI 1 in" or "HDMI 2 in" menu screen. (p. 32)
Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz
('1): The HDMI logo is displayed on an HDMI-compliant device.
(*2): Enquire at your local digital equipment retailer shop.
( Caution "_
@ Use with a PC is not assumed.
@ All signals are reformatted before being displayed on the screen.
@ If the connected device has an aspect adjustment function, set the aspect ratio to "16:9".
@ These HDMI connectors are "type A".
@ These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
@ A device having no digital output terminal may be connected to the input terminal of either "COMPONENT" or "VIDEO" to
receive analog signals.
@ The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i, 1080p.
Match the output setting of the digital device.
@ For details of the applicable HDMI signals, see p. 39.
I.] [e]if:1! r_,_!JJ][e][.]ei IF.TI?III?_ I
You can enjoy your Home theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifier to the
DIGITALAUDIO OUT terminals.
( Caution )
@ Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical
output.
@ When an ATSC channel is selected, the output from the DIGITALAUDIO OUT jack will be Dolby Digital. When an NTSC
channel is selected, the output will be PCM.
@ For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3;
characters might be cut off).
@ The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) has the CC set
to ON within the device itself. Check with your Cable or Satellite provider for instructions. The TV's CC button does
not operate the Satellite or Cable box's CC function.
@ If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC
may overlap on the TV.
@ If a digital program is being output in analog format, the CC data will also be output in analog format.
@ If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor.
38
t(_L3232(_en_O608.indb 38 2010/12/24 13:40:2;
I