Filter
Top Products
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC
525 (480) / 60i 15.73 59.94 *
525 (480)/60p ' 31.47 ' 59.94 * ' * '
750 (720)/60p 45.00 59.94 * *
1,125 (1,080) 160i ' 33.75 ' 59.94 * ' * '
1,125 (1,080)/60p 67.43 59.94 *
1,125 (1,080)t60p ' 67.50 ' 60.00 ' ' * '
1,125(1,080)/24p 26.97 23.98 *
1,125(1,080)124p ' 27.00 ' 24.00 ' ' * '
640 x 400 @70 31.47 70.08 *
640 x 480 _,60 31.47 ' 59.94 ' ' *
Macintosh13" (640 x 480) 35.00 66.67 *
640 x 480 @75 ' 37.50 ' 75.00 ' ' ' *
852 x 480 @60 31.44 59.89 *
800 x 600 _,60 ' 37.88 ' 60.32 ' ' *
800 x 600 @75 46.88 75.00 *
800 x 600 @85 ' 53.67 ' 85.08 ' ' ' *
Macintosh16" (832 x 624) 49.73 74.55 *
1,024 x 768 @60 ' 48.36 ' 60.00 ' ' ' *
1,024 x 768 @70 56.48 70.07 *
1,024 x 768 @75 ' 60.02 75.03 ' ' ' *
1,024 x 768 @85 68.68 85.00 *
Macintosh 21" (1,152 x 870) 68.68 ' 75.06 ' ' ' *
1,280 x 768 @60 47.78 59.87 *
1,280 x 1,024 _..60 ' 63.98 ' 60.02 ' ' *
1,366 x 768 @60 48.39 60.04 *
@ Signals other than above may not be displayed properly.
@ The above signals are reformatted for optimal viewing on your display.
@ Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
@ Signal Names for D-sub 15P Connector
Pin Layout for PC input Terminal
Signal Name signal Name Signal Name
(_i_ R (_) GND (Ground) @ NC (not connected)
_ G _-7_ GND (Ground) @ NC
L-_ B _-_ GND (Ground) @ HD/SYNC
@ NC (not connected) (9_ NC (not connected) _ VD
@ GND (Ground) GND (Ground) NC
@
('3
::3"
"-I
('3
6'
o
"-i
I
39
tc_L3232c_en_O608Jndb 39 2010/12/24 13:40:2;
I