Filter
Top Products
33
Advanced
Operating Peripheral Equipment
Using Timer
Operating Peripheral Equipment
You can operate other manufacturers’ components using this TV’s remote control.
4
1
2
Press both buttons simultaneously
for more than 3 seconds.
•
Release the buttons when the equipment selection
buttons start flashing.
+
3
5
Caution
•
Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
Select the equipment
with the equipment selection button
•
The selected button remains lit (other buttons are not
lit).
Connect the external equipment to the TV and
turn Off the external equipment
Input the equipment’s 4-digit remote
control code
(p. 37-38)
Confirm the equipment with the
remote control
•
The external equipment turns On.
Ŷ
If the equipment does not operate with
remote control
•
When your equipment has a single code
Input the remote control code again
•
When your equipment has multiple codes
Change the code with above and test again
(p. 37-38)
After step above, change the code and
test
store
Operate the equipment with the
remote control (p. 36)
•
Repeat until the code is found
•
It may take many attempts before the correct
code is found
When the correct code is found
change
To find a code not listed in the code list
This procedure searches all codes and is called the “sequence method.”