Filter
Top Products
8
B
B
D
2
Setting-up
Lift the television unit above the pedestal base,
with the back of the display unit on the same side
as the Label. Then align the holes in the television
unit with the poles of the pedestal and lower the
television unit into place.
Use the assembly screws
B
(M5 x 30) to fasten
securely.
3
Stopping the plasma television from falling over
Television unit
Pedestal
Label
* Carry out work on
a horizontal and
level surface.
Accessories/Options
Ŷ
Securing to a base
Ŷ
Securing to a wall
Fasten with wood screws in the holes in the
back edge of the wood worktop. If there are
no holes, first drill them in the middle of the
thickness of the wood worktop, and then
fasten the strap with wood screws.
* Remove the screws at
both top corners on
the rear side of the
plasma TV, and attach
the clamps
4
to the
plasma TV using the
removed screws.
Front
Screws on main body
Wood Worktop
* Use strong wire
or chain which is
commercially available
to secure the plasma
television to a solid
area of the wall or a
pillar.
Securing method
* The plasma TV must be fastened to both the base and the wall.
Front
Rear
Accessories for pedestal security
For 37'', 42'', 50'' Plasma television
1
Band (2)
2
Screw (2)
3
Wood screw (2)
4
Clamp (2)
Nominal diameter
4 mm x 12